1. Shop Fox W1668 Reviews
The introduction of the Shop Fox W1668 caused quite a lot of commotion in the world of professional and also novice woodworkers, since this is easily one of the most feature rich and best benchtop drill press the company has launched in a while. What immediately stands out about the W1668 is not only the speed options and the powerful 3/4 HP motor, but also the special port incorporated in order to collect dust, something that you rarely see so well implemented in a drill press these days.
- Powerful 110V 3/4 HP motor capable of spindle speeds of at least 250 RPMs and maximum 3050 RPMs.
- 13 and one quarter of an inch swing.
- 3-1/4” spindle travel.
- 5/8 drill chuck.
- Features a three piece spindle sander drum kit.
- Ability to convert it into a sander in just a few seconds without the need of special tools or training.
Performance and tilting table
The Shop Fox W1668 is a very powerful and accurate drill press that features 16 different speeds which can easily be adjusted in order to suite the type of job you’re currently working not. If you plan on changing the spindle speed rapidly, then you can easily do that thanks to the simple access provided to the quick adjustment motor mount by hinged pulley and metal belt. While with many other drill presses in this category it’s hard to make fast and accurate adjustments, the W1668 sits in a league of its own allowing you to do this thanks to its tilting, rotating and crank operated table.
You can also tilt the table at ninety degrees to the left or right and because you can adjust its tilt and height, you can accommodate a wide range of workpieces without the need of extra accessories. Better yet, you can also move the drill table and therefore use the base which is perfect for sanding or drilling.
A lot of people have to use separate tools in order to sand their workpieces and if this was also the case with you, then don’t worry about that any longer. With the W1668 you can now convert it in just a few seconds (without the need of any tools) into a machine that can be used for sanding operation. Due to the oscillation feature, heat buildup will be effectively dispersed, therefore resulting in a finely sanded workpiece. You also get a 3 piece spindle drum kit along with a mandrel and an eighty grit sanding paper so you can fit 2”, 11-1/2” and 1” drums.
If you’re a professional or a novice who does plenty of drilling, such as making holes in wood, metal or plastic every day and want to make sure the results you get are perfect, then the Shop Fox W1668 is a rugged, powerful and versatile drill press that can help you get the job done perfectly. Since it can also be converted into an oscillating spindle sander, you get 2 tools for the price of one. As for the money you save, you can purchase some extra accessories which you may need for those complex drilling jobs.
2. Rikon 30-120 Reviews
Rikon has been in the drill press industry for quite some time now and throughout the years they have released some truly best benchtop drill press that have helped millions of metal and woodworkers complete their projects with excellent results and without ruining their workpieces due to the inaccuracy or lack of functionality that many old drill press models are known for.
The new Rikon 30-120 is a cut above the rest, since not only does it offer 16 spindle speeds and features large cast iron handles for ease of us, but it also has a powerful 1/2 HP motor that can take on any type of material and effortlessly drill through it.
- 16 spindle speeds.
- Powerful 1/2 HP motor.
- Table tilt and height adjustment.
- Solid steel and cast iron construction.
- Lock depth stop.
- 2 years warranty.
Powerful 1/2-Horsepower Motor
The half a HP motor is very efficient, smooth and powerful which provides you with plenty of torque for whatever material you’d like to drill holes into. Sometimes though, you’re going to need a little less power and less revolutions per minute and that’s where the 16 spindle speeds come into play to help you out. You can thus change the speed from 200 RPMs and up to 3630 RPMs in order to perfectly suite any workpiece you’d like to work on. There is also a clutch depth stop that allow you to easily set the drill depth, which is great if you are currently or planning to work on projects that require repeated drilling. For another drill press with powerful amp motor you can check Rockwell RK7033 for comparison.
Solid steel and cast iron construction
Since it’s made of solid stainless steel and cast iron, the Rikon 30-120 is a very rugged and durable drill press that’s built for the long haul. Because it comes complete with a base, tilting table and cast iron handles and head, you can have the peace of mind that they won’t loosen or bend no matter how much you’ll use it. Therefore, any project you complete with it is going to look simply perfect.
The Rikon 30-120 has tons of useful features, including a convenient slot design, the ability to tilt the table and also adjust its height. The table can be adjusted thanks to the rack and pinion gears, so with a simple turn of the handle, you can prepare your drill press for whatever project you want to complete with it.
Now when it comes to the slot design, it helps you mount fixtures, vises and jigs in seconds, while the 11-3/16” tilting table (tilts to 45 degrees) can also rotate a full three hundred and sixty degrees.
Dimensions and warranty info
The Rikon 30-120 weights one hundred and twenty one pounds, it has a depth of twenty four inches and a height of thirty nine inches. Given the fact that it’s backed by a 2 year warranty. The owner’s manual is also full of detailed information on how to use the drill, so you can easily learn how to get the best results with it.
As you can see Rikon 30-120 offers 2 year warranty that will give you the peace of mind that you have a quality drill press on your hands that will do wonders in your workshop. Durable as it is made of solid stainless steel and cast iron. For the price it is one of the best, and high standard small drill presses on the market today!
3. Jet JDP-12 Reviews
When you want to buy a drill press you always check to see if it’s the type you need, whether it has a powerful motor and whether the drill diameter and spindle speed are going to compliment your projects. If in your search to find the best drill press you have failed to stumble upon a good model, then let me end your search right here by introducing you to the new Jet JDP-12. This is a very accurate and small drill press from JET that has enough power to drill holes in any materials you want. Since it comes with variable speed and a motor that can spin as fast as 3100 RPMs, you can already gauge just how useful this drill press can be for your workshop.
- 1/3 HP heavy duty induction motor that’s perfect for a wide range of drilling projects.
- Ergonomic and oversized knobs that allow for fast and simple speed change.
- Industrial 5/8-in drill chuck.
- Mechanical variable speed drive system.
- Sheet metal outfeed table that supports long workpieces and is also height adjustable.
- Depth stop for accurate hole drilling.
- Work in the dark thanks to the incorporated LED light.
- High performance laser system.
Powerful motor for any application
Some of us need to drill in wood, while some of us may want to craft some jewelry or make something else that requires us to use soft and hard metals. This means that you definitely need a heavy duty drill press that can easily drill holes accurately in any material you want without exhausting you and without failing on you. In this regard, the Jet JDP-12 doesn’t even break a sweat, no matter if you want to drill holes in stainless steel or in hard plastics. Its powerful 1/3 HP motor has all the power you need to finish your project on time and without too much fuss. But if you are looking for tools that can use on jewel crafting, you can check out Benchtop Drill Press – DRL-300.00.
The Jet JDP-12 features a worktable that’s pretty large so you can easily fit larger workpieces on it. The LxW of the table is nine and a half inches by nine and a half inches, which means you don’t need to use any extra accessories no matter what you’ll want to work with on it. Thanks to the 15 inch spindle distance, the ability to change speed from 530 to 3100 RPMs and the 360 swivel head, you can now finish your projects in half the time it would normally take with a regular drill press, therefore allowing you to finish projects faster and use the spare time to focus on something else.
But probably one of the best features about the Jet JDP-12 is that it comes with an X shaped laser that greatly improves accuracy, while the LED worklight allows you to still keep working on your project long after the sun has set.
If you’d like to drill a lot of holes at exactly the same depth or you’re someone who can always be found in his workshop working drilling something, then the Jet JDP-12 is by far one of the best drill presses you should get. Since it’s packed with useful features and it’s also affordable, you’ll definitely not regret your new acquisition.
4. Rockwell RK7033 Reviews
Buying a new or even more important, your best drill press is a process that involves doing a lot of research, especially if you don’t want to waste your money on a product that has an inferior quality and won’t help you get the results you’re expecting. No matter if you’re a heavy drill press user or if you’re getting one for the first time, you can always trust any product that’s branded Rockwell, especially when it comes to the latest Rockwell RK7033. This is a heavy duty drill press that not only comes with a very powerful 6.2 amp motor, but it can also be adjusted so it can specifically cater to your drilling needs.
- 2/3 HP, 6.2 AMP motor for heavy duty drilling.
- Table tilts to 45 degrees to the left and right.
- Accidental starting prevention thanks to the keyed safety switch.
- Rack and pinion table height adjustment.
- Five speed settings for getting the best results when drilling in plastic, wood and metal.
Performance The Rockwell RK7033 is an excellent addition to your home workshop, especially if you always find yourself spending time in it working on metal, wood or even plastic workpieces. Given the fact that it comes with a six point two 2/3 HP motor and the option to choose from five different speeds, you get an incredible amount of performance for a pretty fair price.
The RK7033 is also very practical and convenient thanks to the forty five degree bevel (left and right) along with the two inch spindle travel, features that you don’t get to see in drill presses of this caliber and within this price range too often. There is also a keyed safety lock that prevents you from turning the RK7033 on by accident and injure yourself. As you can tell from its design, this is a unit that has been built for precise, accurate and repetitive drilling, no matter if you want to drill in metal, plastic or wood.
Rockwell supplies the RK7033 with both a chuck key and an Allen wrench so you can adjust it to your specific needs. Great adaptability You know that when working in your workshop, you’re always going to deal with various surfaces, based on the project at hand. In this case, you’d certainly not want to have your work limited by your drill press and because the RK7033 comes with multiple performance settings, you can also adjust it to suit different heights. As a result, no longer will you have to consider temporary and non-professional solutions to help you complete your projects, solutions that generally put you and the workpiece at risk.
Assembling the RK7033 is very simple, especially given the fact that you get a manual with pictures which show you exactly what you have to do. Just remember to leave the leave the spline with a bit of room to move down and up by 1/16 or so when putting the height adjustment spline on.
As you can see from this review, if you love working with wood, metal and plastic and only want to get professional results no matter the type of projects you consider, then it’s thoroughly recommended that you go with the Rockwell RK7033.
5. Euro Tool DRL-300.00 Reviews
According to the online drill press reviews posted by people who’ve already used it, the Benchtop Drill Press – DRL-300.00 is one of the top choices for people who want to take their woodworking projects to a whole new level. Not only is this a drill press that’s available for a very affordable price, but at the same time it can help you with both large and small projects. The DRL-300.00 also has a small form factor, allowing you to use it in a variety of workshops without having to worry about space concerns.
- Perfect for both small and large drilling projects.
- Economical and space saving form factor.
- Simple to use by both professionals and beginners.
- Weighs only 13 pounds and measures 6-3/4 inches by 6-3/4 inches.
- Up to 8500 RPMs.
- 1 year warranty.
Small form factor with great functionality
The first thing you’ll notice about the DRL-300.00 is just how tiny it is, but don’t let that fool you and make you believe that you’re getting something which may not be up to the task for whatever projects you want to use it for. On contrary, this bad boy can easily help you drill in a wide range of materials while not creating a lot of noise that is the case with other drill presses on the market and therefore upset your neighbors.
The platform measures only -3/4 in by 6-3/4 in, meaning that you don’t need to make any changes to your workshop in order to accommodate it. And with a powerful motor that can spin with 8500 RPMs, you can already tell how much it’s going to help you complete any type of project on time and with excellent results. For comparison you can check out Shop Fox W1668 review.
Drill diameter capacity
Many people are interested in the drill diameter capacity when buying a drill press, since this is very important and a vital necessity for certain projects. In this regard, the DRL-300.00 seems to fare well, because the largest and smallest sizes that are going to fit into it include 7.06 millimeters or 9/32 inch (largest one) and 0.039 millimeters or 1/64 in (smallest size) respectively.
As you can already tell, the DRL-300.00 can easily drill in a lot of materials, including aluminum, stainless steel, copper, brass, but also wood. Because of this, you don’t have to feel limited and forced to purchase a separate drill press just so that you can drill holes in metal.
Great for jewelry crafting
Are you someone who loves crafting jewels? If that’s so, then you’ll absolutely love the DRL-300.00. In fact, this model was specifically made to drill holes in soft metals and using it to crafty jewelry is going to make you realize that this is exactly what the DRL-300.00 was made for.
With a solid build quality, light weight and the ability to drill in a wide range of materials, it’s safe to say that this is one of the best drill presses on the market today you can easily use in order to take your projects to a whole new level. Since the DRL-300.00 is also available for a great price, you’re getting your hands on a deal that’s very hard to beat!