There are a few things you will have to consider when deciding which band saw you should purchase. You have to take into consideration the throat and depth measurements of the saw. Although there are no “ideal” measurements or numbers for these as the best one depends on the type of material you’re trying to cut and its thickness, you would definitely want to opt for the one that allows you to cut the boards and panels of at least 8 inches of depth. The powertec bs900 band saw 9-inch is just the kind of saw you would like to own. This band saw is designed for home use as well as for professional use. The band saw can help you to cut small to medium-sized panels and boards having a cutting depth of up to 8 inches.
The main features and unique benefits of this product are as follows:
The powertec bs900 has a 9-inch throat, which is perfect when you want to cut some smaller panels and boards. Combined with that is its 3-5 inch cutting depth that is adequate for most of your domestic needs and hobby projects. Though the 9-inch throat cannot help you much with the higher width cuts, its good enough for several smaller jobs.
The motor of this band saw has a half horsepower at 2.5 amps and 1725 RPM. This makes it an apt tool for cutting lighter materials such as thin plastic and thin wood. It may have some difficulty with certain forms of metals, but it’s a nice saw to use otherwise. The half horsepower motor makes a relatively less amount of noise; hence, it’s also more pleasant and less disturbing to be working around. The rate of 1725 RPM at which the blade rotates might seem to be on a lower side, but it does make cutting easier and pretty well.
Another unique feature of powertec bs900 is its users find replacing the saw blade quite easy. The quick release lever for blade tension and the blade guard adjustment, both of which are patented, together make this saw a hassle-free tool to maintain than a lot of other saws.
Ability to tilt
Another great feature of powertec bs900 is the ability of the table to be tilted downward to about 45 degrees with pinion and rack adjustments, making some seemingly difficult cuts a little easier. At this angle, you can easily make cuts at least 2 inches deep. The table can support a weight of about 50 lbs on any angle. You would definitely not want to try cutting more heavyweight boards on this tool, so it really doesn’t matter much that this band saw wasn’t made for heavier workloads.
you will get one of the cheapest band saws with so many unique features. It’s a perfect choice for your garage or home workshop and will do justice to your hard work by allowing you to do the job pretty well.
How to Install:
This powertec bs900 band saw 9-inch comes almost assembled. It just requires some additional adjustments, assembling and installation before use. Here are the steps for the installation of this product:
Check for damage before you open the package. If you notice any possible damage, file a claim with the carrier. Check that all parts are present. Locate the following parts when you are ready to assemble:
Do not attempt assembling the parts even if any one part is missing. Check operator’s manual to order the missing parts.
To install the table, locate and remove the trunnion knob. Remove the table locking and insert assembly from the table. Place the table assembly onto the saw frame. Secure the table assembly to the saw frame using the lock screw handle and washer. Verify the blade tracking and tension and properly set the blade guides. Then, calibrate the table in tilted position. Use a combination square to set the table in a position perpendicular to the saw blade. Then, zero the pointer on the tilt scale.
To mount the band saw, check that the band saw has a correct power supply. There should be four mounting holes on the base of the band saw. If there are no pre-drilled holes on the surface of the bench, drill four holes. The band saw can then be installed on the workbench or on a tool stand with the help of bolts, hex nuts and lock washers. Make sure that the band saw is bolted to a level and firm surface and there is enough clearance for the moving piece of work during operation. There must also be enough room for the machine to operate safely.
Do not connect the power source until you are done with the machine assembly. The machine is wired for 60 HZ, 120 volts alternating current. Make sure that the switch is in the “OFF” position before you connect the machine to the power source.
Overall, a great and a must-have product for your small recurring needs. Powertec bs900 band saw 9-inch is, in particular, suited for those how love to use a saw band to try their hand at hobby projects; but do not want to spend a lot of money on a new high-end band saw. The powertec bs900 can do the job quite well without causing deep holes in your pocket. It is also fun to work with this as you can try your hand at different experiments with this little tool. It gets your jobs done quickly and easily. It doesn’t need any intensive training; you just need to follow the simple instructions. For the Price, Powertec bs900 is a good investment that will give you satisfactory services for years after years.
- Patented blade guard adjustment for quick and easy blade change
- Table with rack and pinion adjustment for easy tilt to 45 degrees
- Blade tracking window
- Quick release blade tension lever makes blade changing easy (patented)
- Blade width range 1/8-Inch to 3/8-Inch increased versatility for scroll cutting and resawing
- Motor: 1/2 HP
- Amps: 2.5
- SFPM: 1725 RPM
- Blade Size: 62″ x 1/8″ x 3/8″
- Aluminum Die Casting Table Size: 11-3/4″ x 11-3/4″
- Dust Port: 2″
- Throat Depth: 9″
- Max. Depth of Cut at 90 degrees: 3-5/8″
- Max. Depth of Cut at 45 degrees: 2″
- Weight: 50 lbs
- Band saw buying guide 2017
- Best Benchtop Bandsaws 2017
- Best Stand Mounted Bandsaws 2017
- Best Floor Standing Bandsaws 2017